DIY BUDGET SUNBURST MIRRORS

I am in love with the boho basket wall and sunburst mirror trend. It’s such a soothing and simple aesthetic, and even better, it’s quite budget friendly to create!

You can easily find cute baskets in your local thrift store. You can incorporate some fun touches like paint or tassels and effortlessly design a personal piece that suits your specific space.

Due to COVID-19, shopping and browsing and thrifting has been off the table for me for the most part. I have allowed myself an occasional dash through the dollar store. And I have definitely placed SEVERAL curbside or delivery orders from Michael’s, Target, and Walmart over the past few months.

So I decided to try my hand at creating sunburst mirrors to go with the existing rattan mirrors I had on my living room wall, and I love the way they turned out!

With a few clicks of the mouse, I had all of my materials acquired. And with a few squirts of the glue gun, my mirrors were all assembled. Here’s what I did!

I gathered my materials.

For the small sunburst, I used two packs of wooden dowels from dollar tree and a 5″ mirror from Michael’s.

For the large sunburst, I used 1.25 packs of bamboo skewers from Walmart and a 10″ mirror from Michael’s.

Using my glue gun, I glued the sticks around the back of the mirrors. Space the sticks however you’d like. There’s really no wrong or right…it will all look cute! Notice that the glue job is not super perfect. Trust me, that’s ok. The impefections kinda just add to the boho aesthetic.

Then I cut a circle out of cardboard. I just used the box from some of the packages I’ve had delivered…use whatever you have lying around, and if you don’t have cardboard, improvise. I’m sure there are many things laying around the house that would work just as well.

So…I adhered the cardboard to the back of the mirror with my glue gun. I layered additional smaller pieces of cardboard on top of each other to create a reinforced area to insert the hook that I’m going to use for hanging. Because these mirrors are so lightweight, even with the sticks, the backing doesn’t have to be super heavy duty.

Once the backing was glued on, I twisted my hook into the cardboard. No tools were required …I just twisted it by hand. Super simple!

And then my mirrors were all ready to hang! Joila!

Is this something you would try? Have you created any home decor pieces lately? I’d love to hear about them!

$40 Nightstand Makeover in Four Steps

I recently moved a have been looking for just the right nightstands to go in my bedroom. I’ve seen a few that I liked, and I hemmed and hawed way too long, and now that we are in the middle of the COVID pandemic, store closures have brought my search to a semi-halt.

Of course I can still look around online, and I could do a delivery, but I like having options before making a furniture purchase. And quite honestly, I wasn’t in he mood to spend a lot of money. And I also like going into stores and getting good visuals of the things I’m interested in.

So when I stumbled across two nightstands for $30 on Facebook marketplace, I decided to go with an all-together less expensive, more creative option.

These tables weren’t exactly what I was looking for, but for the price, I could see the potential to turn my weekend quarantine hours into a project that would keep me busy while creating some furniture pieces that would suit my needs.

If my bedroom furniture was a different style, I would have used these well-kept pieces as-is. But I have more rustic contemporary feel going on in my bedroom and figure that these traditional furnishings may work better if they were repainted. I’ve seen a lot of furniture makeovers using matted blue, grey and black and thought that painting in one of those hues was more in my wheel house.

I perused around online and saw that I could do a pick-up order of some matte blue spraypaint from my local Walmart, so I went with that. All of the other materials that I used were things I had around my house leftover from various other projects, so the cost of this project wound up being $30 for the tables and about $7 for three cans of spray paint. Not bad!

Here are the materials I used:

  • Sanding block (I don’t know what the coarseness is because it was leftover from other projects)
  • Rust-Oleum Ultra Matte spraypaint in True Navy (3 cans)
  • Design Master 14 kt gold spraypaint (1 can leftover from other projects)
  • All purpose interior/exterior primer (leftover from other projects)
  • Paintbrush
  • Rags
  • Tarps

So here’s what I did:

1. Sanded the tables. After removing the hardware and the drawers, I used a sanding block and sanded the tables and drawer fronts. The tables had a glossy finish, and I knew I was going to need some texture for the paint to grab on to, so the sanding seemed like a good idea. After I sanded, I wiped them off with a wet rag to remove the dust, and let dry for a few minutes.

2. Primed the tables. I had some primer on hand from another project, and spread a layer on the tables. I didn’t use very much, so if you have some, use what you have. If not, maybe buy a small can or a bottle of spray primer. It may not even be needed if you are working with an unfinished, non-coated wood.

3. Sprayed the tables. I sprayed a thin coat of the navy spraypaint, let it dry about 20 minutes, then sprayed another coat. Once I sprayed the second coat, it needed 24-48 hours to fully fully completely dry.

4. Sprayed the hardware. These tables came with bronze hardware that was pretty well tarnished. If I didn’t have gold spraypaint on hand, I would have left them as is until I found replacement hardware. But…because I love having craft items laying around, I happened to have a can of gold spraypaint. So I gave these knobs a couple of quick coats and they came out perfectly.

I poked holes in the cardboard backing of an ink pen package (lol use what you have, right??) and I set the knobs in there for painting.

 

Once everything dried, I put the knobs into the drawers and that was that! I love how the project came out! And I love even more than I did it for under $40!

Have you done any cute makeovers that you want to share? Drop me a comment!

M signature

DIY Reusable Disinfecting Wipes

Lemme tell you, COVID caught me completely off guard. I have prided myself lately in trying to remove hoarding tendencies from my life. And one area where I’ve worked the hardest is on not stocking up on tons and tons and tons of household items. I would buy one pack of paper towels, one counter cleaner, one pack of paper towels, etc. Use those and re-up when the time was right. Space is limited and I typically don’t use most items very fast.

This no-hoarding lifestyle has totally failed me when it comes to COVID prep. Luckily I had recently re-upped on toilet paper and paper towels, apparently the biggest must-haves for the virus.

But when it comes to disinfecting wipes, I have what remains in one container I bought several months ago, and that’s pretty much it. I had started using non-toxic cleansers years ago because I had a cat, so I haven’t stocked up on virus killing products. This means I have little to no bleach, alcohol, peroxide, etc. This will all be rectified once we return to normal.

But in the mean time, I decided to try to stretch the items I have, and stop trying to fight people in the store for wipes and sanitizers. And with that said, I present to you my quick, easy reusable disinfecting wipes.

Materials:

1) 1 and a half cups of 91% rubbing alcohol

2) 3 tablespoons of Palmolive dish soap

3) 10-20 drops of essential oils

4) Cloths

5) Container

This step is optional. For my purposes, I figured it would be a better for my usage for me to cut them. Also, one of the last things I stocked up on when I moved a couple months ago just happened to be this HUGE bag of microfiber cloths from home Depot that were on clearance for $2.50. I’ve only used a few of them, so they were perfect for this project. Also, cheap wash cloths would work as well.

When you use them, you can toss them in the wash.  You can easily refresh the mixture when necessary.

The end! Easy peasy!  

M signature

Quick COVID Mask Tutorial

QUICK MASK TUTORIAL: Ok, so current #cdc guidance is that “something is better than nothing” when it comes to covering your face when you leave your home during quarantine.

I don’t have any masks and I knew I likely wasn’t going to find any at this point. So I did what a lot of crafty people have done, and fashioned a protective face covering out of materials around my home.

For this project, I used a pillow case and air filter and whipped it into a mask. I am not a seamstress, I am not even super crafty, but here is a quick tutorial of my steps.

My materials included:

1. One pillow case
2. One home air filter that filters out viruses and bacteria
3. Two hair ties
4. Needle, thread and scissors
Note: if you don’t have the air filter, you can definitely stop after step 5.

Also note:  None of this is exact.  I cut the pillow case into halves until I got down to a size that fit my face and this is what it measured out to.

You can stop here and have a perfectly fine mask that will meet the “something is better than nothing” standard. I saw someone suggest adding a filter that blocks viruses for added protection, and I was able to find one at my local Walmart. So I cut a piece of the filter and added it to my mask and sing the steps below.

I’m not a nurse, seamstress, or perfectionist, but I hope this adds an additional layer of protection for the instances when I do have to go out for essentials.

Please don’t mind the grays and the unkempt eyebrows…lol.  Things have slipped a little during the pandemic.

On a serious note, please stay safe y’all!!!  Do not go out unless you HAVE to.  Be mindful of your space when around others.  And be kind to your delivery people, healthcare workers, restauranteurs, and essential workers.  They are exposing themselves and their families daily to keep this country moving!

M signature

Ideas for Handbag Organization

handbag organization

If you’re like me, you have a lot of purses.  A. LOT.  Despite my best efforts to purge and consolidate and minimize, I still have quite a few handbags remaining.  This wasn’t so much of an issue when I lived alone.  But now that I live with my boyfriend, I have to reign this in a little bit.  Apparently there’s no room for my handbag dresser, and having them strewn about the home is a no-go.  Fine.

Before I moved in, I trimmed down my purse collection, and now I have them all isolated to a corner of my closet, piled high.  Real high.  It isn’t functional and definitely isn’t pretty.  I find that I kinda just leave the last one I used on top, so it gets easy to forget about the poor ones on the bottom.  Some may ask…”well, doesn’t that mean you should get rid of the ones on the bottom?”  Of course not!  That’s definitely not logic that I’m going to follow, primarily because…I don’t want to.

So…in my quest to come up with ideas for storing my handbags in the space I’ve been allotted, I rounded up a few ideas from around the web that I thought were cute, functional, affordable, and relatively easy to implement.

book case
{glam book shelf}

closet organizer
{Park-a-Purse Organizer}

 

curtain rod
{Curtain Rod Organizer}

hanging organizer amazon
{Vertical Hanging Storage}

ikea hack
{Book Case With Cubbies}

lid rack
{Lid Rack}

peg board
{Peg Board}

purse wall
{Purse Wall}

wine rack
{Wine Rack}

Depending on your particular situation, one idea may work better than another.  For now, I should probably get to measuring and assessing to see which one will work for me.

tata for now -m- (2)